Mitsubishi Electric MELSEC iQ-R Series User Manual page 314

Target 2-side program
Classification Label name
Module label GN11_SE_1.EIP.bSts_CommunicationDuringStartup
GN11_SE_1.EIP.bSts_CommunicationReady
GN11_SE_1.EIP.uSet_CommunicationStart_D
GN11_SE_1.EIP.unVal_Class1OutputDataSize_Connection_D[1]
GN11_SE_1.EIP.bnSts_Class1DuringDataLink_Connection_D[1]
GN11_SE_1.EIP.bnSts_Class1Error_Connection_D[1]
GN11_SE_1.EIP.unSts_Class1ErrorStatus_Connection_In_D[1]
GN11_SE_1.EIP.unSts_Class1ErrorStatus_Connection_Out_D[1]
Labels to be Define global labels as shown below.
defined
(0) Set the processing for output data to connection No.1 and start EtherNet/IP communication.
(15) When M0 is on, while the 'Class1 data link status' (U0\G7734272.0) of connection No.1 is normal, the data stored after W0 is copied to D0 and later as
output data.
The data stored in D0 or later is refreshed as transmission data for the number of refresh points and then sent to the originator.
(53) By turning on M200, output data setting and EtherNet/IP communication are stopped.
13 PROGRAMMING
312
13.2 Class1 Communications Communication Example
Description
EtherNet/IP communication in process
Communication Ready
EtherNet/IP communication start request
Class1 output data size (connection No.1)
Class1 data link status (connection No.1)
Class1 error status (connection No.1)
Class1 connection error status (error code for
connection No.1 input side (when receiving))
Class1 connection error status (error code for
connection No.1 output side (when sending))
Device
X10
X1F
U0\G7340096
U0\G7729408
U0\G7734272.0
U0\G7734288.0
U0\G7734528
U0\G7735040