Mitsubishi Electric MELSEC iQ-R Series User Manual page 350

Master/local module

Hide thumbs Also See for MELSEC iQ-R Series:

Table of Contents

Start EtherNet/IP communications.

Specify the communication time check, the transmission count, and the IP address for the PING test, and then start the test.

(34) The PING test response result is stored. (Total number of packet transmissions  D3000, receive count  D3001, loss count  D3002, error code 

If a timeout or an error occurs, turn on F0.

13 PROGRAMMING

13.7 Program Example of PING Test

Troubleshooting

Melsec iq-r cc-link ie tsn plus