Mitsubishi Electric MELSEC iQ-R Series User Manual page 481

Own node setting status storage area
■Own node IP address (Un\G2097156 to Un\G2097157, Un\G4194308 to Un\G4194309)
The setting values of the IP address are stored.
Range: 1H to DFFFFFFEH
■Subnet mask (Un\G2097166 to Un\G2097167, Un\G4194318 to Un\G4194319)
The setting values of the subnet mask are stored.
Range: 1H to FFFFFFFFH
0: No setting
■Default gateway IP address (Un\G2097170 to Un\G2097171, Un\G4194322 to Un\G4194323)
The setting values of the default gateway are stored.
Range: 1H to DFFFFFFEH
0: No setting
■Own node MAC address (Un\G2097180 to Un\G2097182, Un\G4194332 to Un\G4194334)
The own node MAC addresses are stored.
• Un\G2097180: 5th byte, 6th byte of the MAC address
• Un\G2097181: 3rd byte, 4th byte of the MAC address
• Un\G2097182: 1st byte, 2nd byte of the MAC address
■Own node network number (Un\G2097183)
The setting value of the network number is stored.
Range: 1 to 239
0: Network number not set
■Station number (Un\G2097184)
The setting value of the station number is stored.
Range: 1 to 120, 125
1 to 120: Local station
125: Master station
■Transient transmission group No. (Un\G2097185)
The setting value of the transient transmission group number is stored.
Range: 1 to 32
0: No group specification
■Auto-open UDP port port number (Un\G2097189)
The port number used for the auto-open UDP port is stored.
■MELSOFT transmission port (TCP/IP) port number (Un\G2097190)
The port number used for the MELSOFT transmission port (TCP/IP) is stored.
■MELSOFT transmission port (UDP/IP) port number (Un\G2097191)
The port number for the MELSOFT transmission port (UDP/IP) is stored
■SLMP transmission port (TCP/IP) port number (Un\G2097193)
The port number used for the SLMP transmission port (TCP/IP) is stored.
■SLMP transmission port (UDP/IP) port number (Un\G2097194)
The port number used for the SLMP transmission port (UDP/IP) is stored.
APPX
Appendix 3 Buffer Memory
A
479