Mitsubishi Electric MELSEC iQ-R Series User Manual page 131

Adding the EDS file
Register the EDS file (profile) of the EtherNet/IP device to be set in the following procedure.
1.
Select the EDS file to be registered in the following window and click the [Open] button.
[Tool]  [Profile Management]  [Register]
2.
The registration is completed when the following window appears.
If the EDS file is not created according to the CIP specifications, it may not be added to the EtherNet/IP
configuration.
8 PARAMETER SETTINGS
8.2 EtherNet/IP Parameter Settings
8
129