Setting parameters
Use the engineering tool to set the parameters.
Setting the CC-Link IE TSN Plus module (originator)
Connect the engineering tool to the originator-side CPU module and set the parameters.
1.
Set the CPU module as follows.
[Project] [New]
2.
Click the [Setting Change] button to use the module label.
3.
Set the CC-Link IE TSN Plus module (RJ71GN11-EIP) as follows.
[Navigation window] [Parameter] [Module Information] Right-click [Add New Module]
13.6 Class3 Tag Communications Communication Example
13 PROGRAMMING
335
13