Setting in the master station
Connect the engineering tool to the CPU module on the master station and set the parameters.
1.
Set the CPU module as follows.
[Project] [New]
2.
Click the [Setting Change] button and set the item that is to use module labels.
3.
Set "Link Direct Device Setting" in "CPU Parameter" to "Extended Mode (iQ-R Series Mode)".
[CPU Parameter] [Memory/Device Setting] [Link Direct Device Setting] [Link Direct Device Setting]
To write module parameters of the CC-Link IE TSN Plus module on a CPU module using an engineering tool,
set "Link Direct Device Setting" to "Extended Mode (iQ-R Series Mode)".
If "Link Direct Device Setting" is "Q Series Compatible Mode", "Write to PLC" cannot be executed.
11.3 Examples of Communication with CC-Link IE TSN Class A Remote Stations
11 PROGRAMMING
235
11