4.
Click the [OK] button to add a module label of the CC-Link IE TSN Plus module.
5.
Set the items in "Basic Settings" as follows.
[Navigation window] [Parameter] [Module Information] [RJ71GN11-EIP(T+E)] [Port2 Module Parameter
(EtherNet/IP)] [Basic Settings]
6.
Click the [Apply] button.
7.
Set the EtherNet/IP communication parameters in "EtherNet/IP Configuration".
[Navigation window] [Parameter] [Module Information] [RJ71GN11-EIP(T+E)] [Port2 Module Extended
Parameter]
8.
From "Module List", add "RJ71GN11-EIP(T+E)" to the list of EtherNet/IP devices and then configure the settings as
follows.
If "RJ71GN11-EIP(T+E)" is not shown in the "Module List", it is necessary to add the EDS file.
For adding the EDS file, refer to the following.
Page 129 Adding the EDS file
13 PROGRAMMING
336
13.6 Class3 Tag Communications Communication Example