Data collection using the CC-Link IE TSN Communication
Software
The cyclic data of each CC-Link IE TSN station is received using the CC-Link IE TSN Communication Software.
For details on the CC-Link IE TSN Communication Software, refer to the following.
CC-Link IE TSN Communication Software for Windows User's Manual
No.0
No.1
No.0: Master station (CC-Link IE TSN Plus module)
No.1, No.2: Local station
No.3: Remote station
(1) CC-Link IE TSN Communication Software (number of connectable modules: 2)
System configuration
For system configuration, refer to the following.
Page 54 Structure When CC-Link IE TSN Communication Software Is Used
Setting method
When connecting the CC-Link IE TSN Communication Software, set multicast mode to the communication mode.
[Module Parameter] [Application Settings] [Communication Mode] [Multicast]
Precautions
■CC-Link IE TSN/CC-Link IE Field diagnostics
The CC-Link IE TSN Communication Software information cannot be displayed using the CC-Link IE TSN/CC-Link IE Field
diagnostics.
■Network configuration settings
• Do not add devices on the "CC-Link IE TSN Configuration" window.
• CC-Link IE TSN Communication Software is not detected using the "Connected/Disconnected Module Detection" function.
[Module Parameter] [Basic Settings] [Network Configuration Settings] [Detailed Setting] [Connected/
Disconnected Module Detection]
No.2
No.3
(1)
Collecting data
(1)
Collecting data
9 FUNCTIONS
211
9.8 Others
9