5.
Set the refresh settings as follows.
[Navigation window] [Parameter] [Module Information] [RJ71GN11-T2] [Basic Settings] [Refresh Settings]
[Detailed Setting]
6.
Set the items in "Application Settings" as follows.
[Navigation window] [Parameter] [Module Information] [RJ71GN11-T2] [Application Settings]
7.
Click the [Apply] button.
8.
Write the set parameters to the CPU module on the local station. Then, reset the CPU module or power off and on the
system.
[Online] [Write to PLC]
In this example, default values are used for parameters that are not shown above. For the parameters, refer to
the following.
MELSEC iQ-R CC-Link IE TSN User's Manual (Application)
11 PROGRAMMING
240
11.3 Examples of Communication with CC-Link IE TSN Class A Remote Stations