Mitsubishi Electric MELSEC iQ-R Series User Manual page 461

Address (decimal) Address
(hexadecimal)
1285320 to 1285321 139CC8H to 139CC9H
1285322 to 1285323 139CCAH to 139CCBH
1285324 to 1285325 139CCCH to 139CCDH
1285326 to 1285327 139CCEH to 139CCFH
1285328 to 1294015 139CD0H to 13BEBFH
1294016 13BEC0H
1294017 13BEC1H
1294018 13BEC2H
1294019 13BEC3H
1294020 13BEC4H
1294021 13BEC5H
1294022 to 1294031 13BEC6H to 13BECFH
1264032 to 1294047 13BED0H to 13BEDFH
1294048 13BEE0H

1294167 13BF57H
1294168 to 1294303 13BF58H to 13BFDFH
1294304 13BFE0H
1294305 to 2097151 13BFE1H to 1FFFFFH
*1 When used as a local station (multicast), the initial value is 5.
• Do not write data to the system areas. Doing so may cause malfunction of the programmable controller
system.
• If the value in an area of one word becomes equal to or higher than 65536, the count stops at 65535
(FFFFH).
Name
PDO information Start offset of link device using RPDO
(Multidrop No.7 of the station
RPDO size
No.120)
Start offset of link device using TPDO
TPDO size
System area
Protocol information Protocol operating status
Write request
Protocol setting
Write execution status
Setting result
Protocol setting status
System area
System area
Timeslot information for slave Timeslot for cyclic transmission (station No.1)
station cyclic transmission

Timeslot for cyclic transmission (station
No.120)
System area
Information for slave station cyclic Multiplier for CC-Link IE TSN Class A (low
transmission speed)
System area
Initial Read
value Write
0 Read
0 Read
0 Read
0 Read
0 Read
0 Read,
write
0 Read,
write
0 Read
0 Read
0 Read
0 Read
0 Read
0 Read
APPX
Appendix 3 Buffer Memory
A
459