Basic Settings - Mitsubishi Electric MELSEC iQ-RJ71EN71 User Manual

2.3

Basic Settings

Set the network configurations, refresh settings, or other parameters for the master/local module.
: Can be set, : Cannot be set
Item
Network Configuration
Settings
Refresh Settings
Network Topology
Submaster Parameters
Operation of Master
Station after
Reconnection
*1 These items can be set when "Submaster Parameters" is set to "Operate with Parameter of Host Station". Configure the same settings
as those of the master station.
2 PARAMETER SETTINGS
128
2.3 Basic Settings
Description
Set parameters of slave stations (the number of
points and assignment of link devices) in the
master station and submaster station.
Set link refresh ranges between the devices of
the CPU module and the link special relay (SB),
link special register (SW), and link devices of the
master/local module, or between the module
label of the CPU module and the link special
relay (SB) and link special register (SW) of the
master/local module.
Select the topology type according to the actual
network configuration.
Configure the setting for the submaster station.
Select whether to set "Network Configuration
Settings" in "Basic Settings" or other parameters
for the submaster station, or to read parameters
of the master station.
When using the submaster function, select the
operation of the master station for when it
returned after disconnection.
Availability
Master Local station
station
 
 
 
 
 
Reference
Submaster
station
*1

Page 129 Network
Configuration Settings
 Page 133 Refresh
Settings
*1

Page 136 Network
Topology

Page 136 Submaster
Parameters
 Page 136 Operation of
Master Station after
Reconnection