Available Software Packages - Mitsubishi Electric MELSEC iQ-R Series User Manual

3.2

Available Software Packages

To configure the EtherNet/IP settings, the engineering tool and EtherNet/IP configuration tool are required.
Software
EtherNet/IP configuration tool
*1 It is compatible with GX Works3 of version 1.082L or later.
EtherNet/IP configuration tool
Please download the EtherNet/IP configuration tool from Mitsubishi Electric FA Global Site.
■Operating environment, installation/uninstallation
For the operating environment and installation/uninstallation of the EtherNet/IP configuration tool, refer to the following.
EtherNet/IP Configuration Tool Installation Instructions
■Operation methods and functions
The EtherNet/IP configuration tool is operated from "EtherNet/IP Configuration" of the engineering tool. For details, refer to
the following.
Page 117 "EtherNet/IP Configuration" window
• Separately install the EtherNet/IP configuration tool because it is not automatically installed at the
installation of the engineering tool.
• If the engineering tool is installed when the EtherNet/IP configuration tool has already been installed, the
CC-Link IE TSN Plus module cannot be added in the engineering tool. Install the engineering tool, then the
EtherNet/IP configuration tool.
■EDS file
Download the EDS file of the CC-Link IE TSN Plus module from Mitsubishi Electric FA Global Site.
Obtain the EDS file of the EtherNet/IP device to be connected from the website of each device manufacturer.
3 EtherNet/IP SYSTEM CONFIGURATION
58
3.2 Available Software Packages
Supported version
*1
Version 1.00A or later