2.3
Basic Settings
Set the network configuration, link refresh settings, or other parameters for the master/local module.
: Can be set, : Can be set partly, : Cannot be set
Item
Availability
Master station
Own Station Setting
Network Configuration
Settings
Link Refresh Settings
Initial Settings
*1 When "Setting Method of Basic/Application Settings" under "Parameter Setting Method" in "Required Settings" is set to "Program",
"Basic Settings" cannot be set.
Own Station Setting
Set the number of occupied stations or expanded cyclic setting for the master/local module.
Item
Description
Number of Occupied Stations
Set the number of occupied stations of a local station or the standby master station.
Extended Cyclic Setting
Set the extended cyclic setting of a local station or the standby master station.
This item can be set only when "Mode" under "Required Settings" is set to "Remote Net Ver.2
Mode".
*1
Master station
(duplex function)
Reference
Local station/standby
master station
Page 59 Own Station Setting
Page 60 Network
Configuration Settings
Page 62 Link Refresh
Settings
Page 65 Initial Settings
Setting range
• 1 Station Occupied
• 2 Stations Occupied
• 3 Stations Occupied
• 4 Stations Occupied
(Default: 1 Station Occupied)
• Single
• Double
• Quadruple
• Octuple
(Default: Single)
2 PARAMETER SETTINGS
2.3 Basic Settings
2
59