Ethernet/Ip Configuration" Window - Mitsubishi Electric MELSEC iQ-R Series User Manual

"EtherNet/IP Configuration" window

Set the communications parameters of the EtherNet/IP device.
[Navigation window]  [Parameter]  [Module Information]  Target module  [Port2 Module Extended Parameter]
Please download the EtherNet/IP configuration tool from Mitsubishi Electric FA Global Site.
Parameter settings for EtherNet/IP devices
Set the parameters of the EtherNet/IP device for the CC-Link IE TSN Plus module.
1.
Register the EDS file of the EtherNet/IP device to be set. ( Page 129 Adding the EDS file)
2.
Select the module in "Module List" and drag it to the list of EtherNet/IP devices.
EtherNet/IP device list
Module list
3.
Sets the parameters of the EtherNet/IP device. The parameters differ depending on the communication method to be
used.
• Class1 instance communications ( Page 130 Setting the Class1 instance communications)
• Class1 tag communications ( Page 132 Setting the Class1 tag communications)
• UCMM tag communications (Page 134 Setting the UCMM tag communications)
• Class3 message communications ( Page 135 Setting the Class3 message communications)
• Class3 tag communications ( Page 136 Setting the Class3 tag communications)
4.
Check the system configuration.
[EtherNet/IP Configuration]  [Check]  [System Configuration]
5.
Select [Close with Reflecting the Setting] and close the "EtherNet/IP Configuration" window.
8 PARAMETER SETTINGS
8.2 EtherNet/IP Parameter Settings
8
117