Mitsubishi Electric MELSEC iQ-R Series User Manual page 379

"CC-Link IE TSN/CC-Link IE Field Diagnostics" window
In this manual, "Authentication Class" is described as "CC-Link IE TSN Class".
Item
Select Module
Diagnostics
[Change Module]
Destination
button
Select Station
Monitor Status [Start Monitoring]
button
[Stop Monitoring]
button
[Update] button
[Legend] button
St. Info
Description
Displays the CC-Link IE TSN Plus module being diagnosed.
When multiple CC-Link IE TSN Plus modules are mounted, changes the CC-Link IE TSN Plus module to be
diagnosed.
However, when multiple CC-Link IE TSN Plus modules with the same network number are mounted on the same
base unit, the module with the smallest slot number on that base unit is always diagnosed, regardless of setting.
Selects the station number of the station to be diagnosed.
A station to be diagnosed can also be selected by clicking the module icon displayed in the network map.
Starts monitoring the CC-Link IE TSN/CC-Link IE Field diagnostics.
Stops monitoring the CC-Link IE TSN/CC-Link IE Field diagnostics.
If the actual network configuration and network map of the "CC-Link IE TSN/CC-Link IE Field Diagnostics" window
are inconsistent, the network map update is executed so they are matched. A data link error may momentarily occur
in all the stations and outputs of the connected slave stations may turn off since all stations on the network will be
reconnected when executing the network map update. Set output data if needed.
Displays the meaning of icons displayed in the "CC-Link IE TSN/CC-Link IE Field Diagnostics" window.
The display name of the slave station can be selected from "By Device Name", "By Station Type", "By Model Name",
or "By IP Address".
"By Device Name" displays the information entered in "Alias" of "Network Configuration Settings" under "Basic
Settings". The station type is displayed when the "Alias" is not entered.
17 CHECKING THE NETWORK STATUS
17.1 Checking the Status of CC-Link IE TSN
17
377