4.
Set the items in "Required Settings" as follows.
[Navigation window] [Parameter] [Module Information] [RJ71GN11-EIP(T+E)] [Port1 Module Parameter (CC-
Link IE TSN)] [Required Settings]
5.
Set the refresh settings as follows.
[Navigation window] [Parameter] [Module Information] [RJ71GN11-EIP(T+E)] [Port1 Module Parameter (CC-
Link IE TSN)] [Basic Settings] [Refresh Settings] [Detailed Settings]
6.
Click the [Apply] button.
7.
Write the set parameters to the CPU module on the local station. Then, reset the CPU module or power off and on the
system.
[Online] [Write to PLC]
In this example, default values are used for parameters that are not shown above. For the parameters, refer to
the following.
Page 73 Parameter Settings for CC-Link IE TSN
11 PROGRAMMING
224
11.2 Communication Example of the Master Station and Local Stations