Option
When Cyclic is selected for the trigger specification, change the value of 'RPI' (Un\G7751688) or of the i_uRPI(RPI) of the
module function block to change the sending interval from the value set in the Class3 communications parameters.
CPU module
(1) Turn on 'Class3/UCMM communication execution request' (Un\G7749632 to Un\G7749647).
(2) Command request
(3) Change RPI from 200ms to 400ms.
Precautions
An area available for Class3: Tag communications is limited to an area for a connection set in the Class3 communications
parameters in "EtherNet/IP Configuration".
If a request is executed by using an area not available for Class3 communications (request area where the value of
'Communication method specification' (Un\G7751680) is 0001H (UCMM communications)), an error (error code: 0004H) is
stored in 'Result storage area' (Un\G7752706) in the corresponding response area.
12 FUNCTIONS
282
12.3 Message Communication Function (Client)
RJ71GN11-EIP
Client
(1)
200
200
ms
ms
200
200
ms
ms
200
200
(3)
ms
ms
400
400
ms
ms
External device
Server
(2)
(2)
(2)
(2)
(2)