Appendix 2 I/O Signals; List Of I/O Signals - Mitsubishi Electric MELSEC iQ-R Series User Manual

Appendix 2
This section describes the I/O signals for the CPU module of the CC-Link IE TSN Plus module. The I/O signal assignment for
when the start I/O number of the CC-Link IE TSN Plus module is "0" is listed below.

List of I/O signals

The following tables list I/O signals. The device X is an input signal from the CC-Link IE TSN Plus module to the CPU module.
The device Y is an output signal from the CPU module to the CC-Link IE TSN Plus module.
Input signals
Device No.
X0
X1
X2
X3
X4 to XD
XE
XF
X10
X11
X12
X13 to X1E
X1F
Output signals
Device No.
Y0 to YD
YE
YF
Y10 to Y11
Y12
Y13 to Y1F
Do not use (turn on) any "use prohibited" signals as an input or output signal to the CPU module. Doing so
may cause the programmable controller system to malfunction.
APPX
452

Appendix 2 I/O Signals

I/O Signals
Signal name
Module failure
Own Data Link
Use prohibited
Other Data Link (use prohibited in a local station)
Use prohibited
Own Error
Module Ready
EtherNet/IP communication in process
Use prohibited
PING test completion
Use prohibited
Communication Ready
Signal name
Use prohibited
Module error clear request
Use prohibited
Use prohibited
PING test execution request
Use prohibited