Mitsubishi Electric MELSEC iQ-R Series User Manual page 382

In the following cases, the network map is displayed differently from the actual connection status.
Connection status
Two stations are connected through a switching hub.
No.0
Switching hubs are in cascade connection.
No.0
No.1
■Precautions
• Stations in offline mode are not displayed in the network map. In line topology, stations connected after a station in offline
mode are not displayed because they are disconnected.
• If a station whose connection information cannot be obtained exists in a line topology, the network map will be displayed as
a star topology.
17 CHECKING THE NETWORK STATUS
380
17.1 Checking the Status of CC-Link IE TSN
TSN HUB
No.2
TSN HUB
TSN HUB
No.2
No.4
Display of the network map
Branches are not displayed in the network map.
Only one branch is displayed.