Basic Settings - Mitsubishi Electric MELSEC iQ-F FX5 Series User Manual

5.3

Basic Settings

Set the network configurations, refresh settings, or other parameters for the Motion module.
In this manual, "Authentication Class" is described as "CC-Link IE TSN Class" and "slave station" is described as "device station".
Item
Network Configuration Settings
Refresh Settings
Network Topology
Communication Period Setting
Connection Device Information
Device Station Setting
5 PARAMETER SETTINGS
100
5.3 Basic Settings
Description
Set parameters of device stations (the number of points and assignment of link
devices) in the master station.
Assign link refresh ranges between the following devices.
• SB, SW, link devices (RX, RY, RWr, RWw) of the Motion module  Devices of the
CPU module
Select the network topology type according to the actual network configuration.
Perform basic cycle setting and multiple cycle setting.
Sets the CC-Link IE TSN Class of connected devices.
Set the number of consecutive communication failures until a device station is
considered disconnected.
Reference
Page 108 "CC-Link IE
TSN Configuration"
Window
Page 101 Refresh
settings
Page 103 Network
Topology
Page 103
Communication Period
Setting
Page 104 Connection
Device Information
Page 104 Device
Station Setting