13.2
Class1 Communications Communication Example
This section describes examples of executing Class1 instance communications and Class1 tag communications between the
CC-Link IE TSN Plus module and an EtherNet/IP device.
Data communications between the send/receive data assigned to the buffer memory area and the CPU
device can be used the following methods: using by the MOV instruction or the FROM/TO instruction and
using with a module FB.
For details on the communication method with a module FB, refer to the following.
MELSEC iQ-R EtherNet/IP Function Block Reference
System configuration
The following system configuration is used to explain communication examples of Class1 instance communications and
Class1 tag communications.
(1)
(1) Programmable controller system (originator)
• Power supply module: R61P
• CPU module: R04CPU
• CC-Link IE TSN Plus module: RJ71GN11-EIP (start I/O number: 0000H to 001FH, IP address: 192.168.4.51)
(2) Programmable controller system (target 1)
• Power supply module: R61P
• CPU module: R04CPU
• CC-Link IE TSN Plus module: RJ71GN11-EIP (start I/O number: 0000H to 001FH, IP address: 192.168.4.1)
(3) Programmable controller system (target 2)
• Power supply module: R61P
• CPU module: R04CPU
• CC-Link IE TSN Plus module: RJ71GN11-EIP (start I/O number: 0000H to 001FH, IP address: 192.168.4.2)
Communication description
The following figure shows the relationships of buffer memory areas of the CC-Link IE TSN Plus module with each target.
RJ71GN11-EIP (originator)
'Class1 Input Area'
(Un\G7348224 to Un\G7533055)
64 words
248 words
13 PROGRAMMING
298
13.2 Class1 Communications Communication Example
(2)
RJ71GN11-EIP (target 1)
'Class1 Output Area'
(Un\G7536640 to Un\G7721471)
64 words
(3)
RJ71GN11-EIP (target 2)
'Class1 Output Area'
(Un\G7536640 to Un\G7721471)
248 words
: Class1 instance
communications
: Class1 tag
communications