Setting In The Master Station - Mitsubishi Electric MELSEC iQ-R Series User Manual

Setting in the master station

Connect the engineering tool to the CPU module on the master station and set the parameters.
1.
Set the CPU module as follows.
[Project]  [New]
2.
Click the [Setting Change] button and set the item that is to use module labels.
3.
Set "Link Direct Device Setting" in "CPU Parameter" to "Extended Mode (iQ-R Series Mode)".
[CPU Parameter]  [Memory/Device Setting]  [Link Direct Device Setting]  [Link Direct Device Setting]
To write module parameters of the CC-Link IE TSN Plus module on a CPU module using an engineering tool,
set "Link Direct Device Setting" to "Extended Mode (iQ-R Series Mode)".
If "Link Direct Device Setting" is "Q Series Compatible Mode", "Write to PLC" cannot be executed.
11.2 Communication Example of the Master Station and Local Stations
11 PROGRAMMING
219
11