Mitsubishi Electric MELSEC iQ-R Series User Manual page 136

Setting the UCMM tag communications
To perform UCMM tag communications for the EtherNet/IP device, follow the procedure below.
Set UCMM tag communications only when the own station operates as a server (target).
1.
Connect the engineering tool to the target side, double-click "<Detailed Setting>" in the "Connection Setting" column in
the "EtherNet/IP Configuration" window, and set the connection of the EtherNet/IP device.
2.
Select "Tag" in "Connection List" and click the [Add Connection] button.
3.
Select "Connection (Class3/UCMM Tag)" in "Select Connection to be Added:" and click the [OK] button.
4.
Set the parameter for the UCMM tag communications in "Connection Detailed Setting". ( Page 121 Connections:
Class3/UCMM tag)
5.
Click the [OK] button to reflect the parameter.
6.
Select [Close with Reflecting the Setting] and close the "EtherNet/IP Configuration" window.
8 PARAMETER SETTINGS
134
8.2 EtherNet/IP Parameter Settings