Structure Of Cc-Link Ie Tsn Class B Devices And Ethernet Devices - Mitsubishi Electric MELSEC iQ-R Series User Manual

2.1
Structure of CC-Link IE TSN Class B Devices and
Ethernet Devices
This section describes the system configuration when "Connection Device Information" under "Basic Settings" of the
engineering tool is set to "CC-Link IE TSN Class B Only".
When "Connection Device Information" under "Basic Settings" of the master station is set to "CC-Link IE TSN Class B Only",
up to 121 devices (1 master station and 120 slave stations) can be connected.
No.0 No.1
Class B (1Gbps) Class B (1Gbps)
No.0: Master station (CC-Link IE TSN Plus module)
No.1, No.2: Local station
No.3 to No.7: Remote station
(1) Ethernet device
Class B: CC-Link IE TSN Class B device
The availability of connection of network configuration devices varies depending on the communication mode and
communication speed.
Communication mode
Unicast mode
Multicast mode
The following terms are used to describe the terms in the tables referenced.
(1)
No.0
2 CC-Link IE TSN SYSTEM CONFIGURATION
28

2.1 Structure of CC-Link IE TSN Class B Devices and Ethernet Devices

TSN HUB
Reference
Page 29 When the communication speed for the master station is set to 1Gbps
Page 30 When the communication speed for the master station is set to 100Mbps
Page 31 When the communication speed for the master station is set to 1Gbps
Page 32 When the communication speed for the master station is set to 100Mbps
(2) (1)
No.1 No.2
No.2 No.3
Class B (1Gbps) Class B (1Gbps)
No.4 No.5
Class B (1Gbps) Class B (1Gbps)
(2)
No.3
(1)
(1Gbps)
No.6
Class B (100Mbps)
No.7
Class B
TSN HUB (100Mbps)
No.0: Master station
No.1, No.2: Local station
No.3: Remote station
(1) Device on the master station side
(The master station or a device near
the master station)
(2) Device on the end side (A device far
from the master station)