Mitsubishi Electric MELSEC iQ-R Series User Manual page 348

4.
Click the [OK] button to add a module label of the CC-Link IE TSN Plus module.
5.
Set the items in "Basic Settings" as follows.
[Navigation window]  [Parameter]  [Module Information]  [RJ71GN11-EIP(T+E)]  [Port2 Module Parameter
(EtherNet/IP)]  [Basic Settings]
6.
Click the [Apply] button.
7.
Write the set parameters to the CPU module. Then reset the CPU module or power off and on the system.
[Online]  [Write to PLC]
In this example, default values are used for parameters that are not shown above. For the parameters, refer to
the following.
Page 112 EtherNet/IP Parameter Settings
13 PROGRAMMING
346
13.7 Program Example of PING Test