Performance Specifications Of Ethernet - Mitsubishi Electric MELSEC iQ-R Series User Manual

4.2

Performance Specifications of Ethernet

The following table lists the performance specifications of Ethernet for the CC-Link IE TSN Plus module.
Item
Transmission specifications Data transmission speed
Communication mode
Interface
Maximum frame size
Jumbo frame
Maximum segment length
Number of cascade connections
IP version
Sending/receiving data System connections
storage memory
User connections
*1 For maximum segment length (length between switching hubs), consult the manufacturer of the switching hub used.
*2 When one connection is for one device, up to eight devices can be connected.
The operation of commercial devices used for the following applications is not guaranteed. Check the
operation before using the module.
• Internet (general public line) (Internet-access service offered by an Internet service provider or a
telecommunications carrier)
• Firewall device(s)
• Broadband router(s)
• Wireless LAN
1000BASE-T
100BASE-TX
Connection with MELSOFT
product
Connection to SLMP-compatible
devices
Socket communications
Description
Connection to P1 Connection to P2
• 1Gbps
• 100Mbps
Full-duplex
Full-duplex
RJ45 connector (Auto MDI/MDI-X)
1518 bytes
Not available
100m (distance between a switching hub and a station)
Consult the manufacturer of the switching hub used.
Compatible with IPv4
*2

Up to 8
*2
Up to 8 Up to 8
2046 bytes  8 10238 bytes  8
4 PERFORMANCE SPECIFICATIONS
4.2 Performance Specifications of Ethernet
4
*1
*2
61