When the networks consist of MELSEC iQ-R series and other series
Setting communication paths allow communications with the following networks configured with modules other than MELSEC
iQ-R series.
• Ethernet
• CC-Link IE Controller Network
• CC-Link IE Field Network
• MELSECNET/H
• MELSECNET/10
■Setting method
Set communication paths in "Routing Setting" of "CPU Parameter". ( MELSEC iQ-R CPU Module User's Manual
(Application))
Communication test
This test checks if transient transmission data can be properly routed from the own station to the communication target. (
Page 382 Communication Test)
9 FUNCTIONS
178
9.3 Transient Transmission