Mitsubishi Electric MELSEC iQ-R Series User Manual page 29

CC-Link IE TSN Class Setting
From "Connection Device Information" under "Basic Settings" of the engineering tool, select either of the following items
according to devices to be connected.
Connected device System configuration
information
CC-Link IE TSN Class B Select this if the system is to be configured without connecting the CC-Link IE TSN Class A device.
Only Page 33 Connection with modules on CC-Link IE TSN only
Page 36 Connection with modules on CC-Link IE TSN and Ethernet devices
Mixture of CC-Link IE TSN Select this if the system is to be configured by connecting a CC-Link IE TSN Class A device now or
Class B/A or CC-Link IE in the future. (Connection is also possible when the system is configured with CC-Link IE TSN
TSN Class A Only Class B devices only.)
Page 38 Structure of CC-Link IE TSN Class B/A Devices and Ethernet Devices
*1 IEEE 802.1AS or IEEE 1588 depends on the protocol version of the connected device. For details, refer to the following.
Page 569 Time synchronization method and connection specifications for network configuration devices
Modules can be connected in any order regardless of the station number. A No. shown in the figure below
represents a station number.
No.1
No.1: CC-Link IE TSN Plus module
No.0, No.2, and No.3: CC-Link IE TSN master/local module
Ethernet connection
For connection with MELSOFT products and connection with SLMP-compatible devices, refer to the following.
Page 179 Ethernet Connection
No.0 No.3
Supported standard
IEEE802.1AS
IEEE 802.1AS or IEEE
1588
No.2
2 CC-Link IE TSN SYSTEM CONFIGURATION
2
*1
27