Module Parameters (Recorder Module); Basic Settings - Mitsubishi Electric MELSEC iQ-R Series User Manual

2.2

Module Parameters (Recorder Module)

This section shows the module parameters of a recorder module.

Basic settings

The following shows the screen for the various operation settings, own node setting, and recording buffer setting of a recorder
module.
(1) Recording buffer setting icon
Various operation settings
Set the mode setting for a recorder module.
Item Description
Mode Settings Set the operation mode of a recorder module.
• Online: Normal operation mode
• Automatic Hardware Test: The test on hardware, such as ROM/RAM/Ethernet of the recorder
module, is performed.
• Hardware Test for LED Check: The test on the recorder module LED is performed.
• Firmware Update: A mode to update the firmware of the recorder module.
Own node setting
Set the IP address setting for a recorder module.
Item
IP Address Acquire
*1
Setting Automatically/
Specify
IP Address
Subnet Mask
Default
Gateway
*1 Can be set only when selecting "Online" for "Mode Settings."
*2 Can be set only when selecting "Specify" for "Acquire Automatically/Specify."
2 PARAMETER SETTING
50
2.2 Module Parameters (Recorder Module)
(1)
Description
Select "Acquire Automatically" or "Specify" for the IP address.
*2
Set an IP address, subnet mask, and default gateway.
Double-clicking a cell opens the "Setting for IP Address" screen.
*2
*2
Setting range
• Online
• Automatic Hardware Test
• Hardware Test for LED Check
• Firmware Update
(Default: Online)
Setting range
• Acquire Automatically
• Specify
(Default: Specify)
Page 51 IP address
setting screen