Mitsubishi Electric MELSEC iQ-R Series User Manual page 32

When the communication speed for the master station is set to 100Mbps
This mode indicates the availability of connection with a network configuration device when "Communication Speed" of the
master station set to "100Mbps".
: Connection available, : Connection available via a switching hub, : Connection not available
S: TSN hub available
H: General-purpose hub available
Device on the master station
side
(The side near the master
station)
Master station
(CC-Link IE TSN
Class B device)
Local station
(CC-Link IE TSN
Class B device)
Remote station
(CC-Link IE TSN
Class B device)
*1 For a slave station with a communication speed of 100Mbps, set "Communication Period Setting" to "Basic Period" or "Normal-Speed"
(4 times).
*2 If the device on the master station side is a CC-Link IE TSN Plus module, only P1 can be connected.
*3 If the device on the end side is a CC-Link IE TSN Plus module, only P1 can be connected.
*4 Connection is not possible if the device on the master station side is a CC-Link IE TSN Plus module.
*5 If the device on the master station side is a CC-Link IE TSN Plus module, only P2 can be connected.
■Precautions
When a TSN hub is used, check the TSN hub specifications on the CC-Link Partner Association website (www.cc-link.org).
2 CC-Link IE TSN SYSTEM CONFIGURATION
30
2.1 Structure of CC-Link IE TSN Class B Devices and Ethernet Devices
Device on the end side (The side far from the master station)
Local station (CC-Link IE TSN
Class B device)
1Gbps

100Mbps

1Gbps

100Mbps

1Gbps

100Mbps
Remote station (CC-Link IE
TSN Class B device)
100Mbps 1Gbps
*1*2*3
S 
 
*1*3*4
S 
 
*1*3
S 
Ethernet device
100Mbps 1Gbps
*1*2
S 
 
*1*4
S 
 
*1
S 
100Mbps
SH

*5
SH

SH