Bearing Replacement; Dismantling - BT REFLEX RR B Service Manual

19
13
30
© BT Europe AB
Electric pump motor –1710

Bearing replacement

Valid from serial number
713962-
Order number
218920-040
10.4 Bearing replacement
16
6
17 9
22
D
28

10.4.1 Dismantling

Motors without pumps.
• Loosen the screws (23) and remove the protective plate (8).
• Loosen the stud screws (20) using tool 08-15444.
• Remove the shield (3) and washer (7).
If both bearings are to be replaced follow the points below. When only
replacing the pulse sensor bearing continue with A.
• Remove the screws (22).
• Lift the rotor (4) out of the stator (1).
• Dismount the shield (2) radial seal (19).
• Remove the circlip (16) and support ring (17).
• Pull off the bearing with a puller.
A)
• Pull off bearing (5) with a puller.
Service Manual
https://www.forkliftpdfmanuals.com/
26 25
2 1
4 11 24 27
REFLEX RR B/E, RR B/E CC
T-code
403-414, 669-671, 716-718
Date
2005-06-01
10 36
20
21
3
8
23
7
5
N
10- 3