BT REFLEX RR B Service Manual page 369

© BT Europe AB
Main mast –7100
Assembling the mast
Valid from serial number
713962-
Order number
218920-040
• Guide the mast slowly to the reach carriage (1).
• Stop approximately 100 mm from the reach carriage (1).
• Insert the feeder hose (2) into the reach carriage.
• Guide in the mast fully and lower it so it rests on the pins (3).
• Position the top section of the pin holder and secure loosely with the
four bolts (4).
• Screw in the bolts (5) that hold the mast in the bottom of the reach
carriage, just far enough so that the shims still have space.
• Position the shims (6) and move the overhead crane in the direction
of the forks so that they fasten with the mast.
• Tighten the bolts (4 and 5) with the following torque:
Stud bracket bolt (4)
Bottom bolt (5)
Service Manual
https://www.forkliftpdfmanuals.com/
B/E1-B/E8
197 Nm
385 Nm
REFLEX RR B,E RR B,E CC
T-code
403-414, 669-671, 716-718
Date
2005-06-01
35- 5