BT REFLEX RR B Service Manual page 400

37- 16
Lifting devices – 7400
Troubleshooting
T-code
403-414, 669-671, 716-718
Date
2005-06-01
through the second washer, then the vertical plate and then
the first washer. Then screw the bolt tight on the piston rod.
Put the washers either side of the plate on the outer fork and
do not attempt to eliminate any clearance that remains once
the bolt is fastened. The remaining clearance will prevent the
piston rod from being damaged.
22. The slide forks have to be extended and retracted several
times in order to get the air out of the system.
Service Manual REFLEX RR B,E RR B,E CC
https://www.forkliftpdfmanuals.com/
Valid from serial number
713962-
Order number
218920-040
© BT Europe AB