BT REFLEX RR B Service Manual page 308

24- 96
Electronic card – 5710
Error Codes
T-code
403-414, 669-671, 716-718
Date
2005-06-01
Code 229 - 230
Description Too high voltage on lift regulator
Error mode Lift regulator error
Error cause 1. Defective battery
2. Poor contact at K10's contactor points
3. Defective lift regulator, A2
Comments
Battery circuit
1. Check that the battery is okay, sufficiently charged and of the
right model.
2. Check the contactor points on K10.
3. If everything is okay, replace A2.
Service Manual REFLEX RR B/E, RR B/E CC
https://www.forkliftpdfmanuals.com/
Valid from serial number
713962-
Order number
218920-040
© BT Europe AB