BT REFLEX RR B Service Manual page 338

29- 2
Mast mounted hose reel – 6370
Check after assembly
T-code
403-414, 669-671, 716-718
Date
2005-06-01
29.3 Check after assembly
When the hose reel is first used lift the forks to the maximum lift height.
Check that the hose and hose drum work correctly and count the
number of turns that the hose drum rotates.
The total of the number of turns made by hand when preloading and the
number of turns for maximum extract must be 10 at most.
Turns with preloading + operating turns = max 10
NOTE:
The hose must not be fully unwound from the hose drum at maximum
lifting height. At least
Make sure that the hose drum can still be turned by hand with the hose
fully extracted. The hose drum must not lock up.
Check that the hose rewinds correctly when the forks are lowered. The
hose must always be loaded otherwise there is a risk of the hose sliding
over the side plates. If this is the case adjust the preloading tension.
NOTE:
The spring-loaded eye must face the hose's direction of unwinding.
Spare parts must correspond with the manufacturer's defined technical
specifications. This demand is always met when using original spare
parts.
Service Manual REFLEX RR B/E, RR B/E CC
https://www.forkliftpdfmanuals.com/
Valid from serial number
713962-
Order number
218920-040
¼
turn of hose must remain on the hose drum.
© BT Europe AB