BT REFLEX RR B Service Manual page 241

© BT Europe AB
Electronic card – 5710
Warning Codes without registration
Valid from serial number
713962-
Order number
218920-040
- If the mechanics are okay, check that the cables from U10, white
cable 98 to input 301 and black cable 99 to input 302 are not bro-
ken. Check that there is no play or oxidisation on the connector
pins on terminals X28, X16 and X15.
- If the cables and connector are okay, replace the height sensor
U10.
3. Is the oil too thick, standard oil in a coldstore truck. Is it espe-
cially fork lowering that runs too slowly?
4. Fork lowering will be too slow, if the forks are missing.
5. If nothing helps, replace the A5 card.
Code
Description
Error mode
Error cause
Comments
Seat switch S89
1. If LD203 is on the entire time.
- Check that the seat switch has not been strapped.
- Remove cable 49 on switch S89, terminal 3. If LD203 goes out,
check the functionality of S89.
Service Manual
https://www.forkliftpdfmanuals.com/
14
Seat switch activated more than 20 minutes without
moving the truck
No corrective action
1. Strapped switch
2. Faulty switch/wiring
3. Defective electronic card A5
REFLEX RR B/E, RR B/E CC
T-code
403-414, 669-671, 716-718
Date
2005-06-01
24- 29