Mechanical Drive Gear Unit - 2550; General; Components/Data For The Drive Assembly/Transmission - BT REFLEX RR B Service Manual

© BT Europe AB
Mechanical drive gear unit – 2550

General

Valid from serial number
713962-
Order number
218920-040
13- Mechanical drive gear unit – 2550
13.1 General
This type of truck is equipped with a drive gear unit mounted on the
chassis with 6 bolts.
The transmission is integrated with the motor, brakes, and sensor
measuring speed, steering wheel direction and direction of travel, as a
complete drive assembly. The drive assembly is equipped with 360°
steering.
The transmission in this truck is a two-stage angle transmission with
conical roller bearings on the drive shaft and pinion. The bearings are
pre-tensioned approximately 5/100ths of a mm to minimise the risk of
play in the bearings.
This service instruction includes directions for dismantling and assem-
bling the drive transmission, filling and changing the oil and measures
in the event of leakage. A complete renovation of the drive transmission
is so extensive that specially trained personnel must do this in the work-
shop.
13.2 Components/data for the drive
assembly/transmission
The drive transmission's main components and data are shown in the
following diagram and table.
Service Manual
https://www.forkliftpdfmanuals.com/
REFLEX RR B/E, RR B/E CC
T-code
403-414, 669-671, 716-718
Date
2005-06-01
13- 1