BT REFLEX RR B Service Manual page 277

© BT Europe AB
Electronic card – 5710
Warning codes with registration
Valid from serial number
713962-
Order number
218920-040
Code
Description
Error mode
Error cause
Comments
Accelerator R1
1. Check that R1 is located in its bracket.
Check that there is no play or oxidisation on the connector
pins on terminal X19. The voltage on input 501 should be 3,7 +/
- 0.2 VDC when R1 is correctly mechanically adjusted.
2. If the correct voltage is on input 501 and the fault remains, re-
place the A5 electronic card.
Service Manual
https://www.forkliftpdfmanuals.com/
94
Potentiometer R1 for accelerator pedal gives incor-
rect voltage (<0.4 or >4.6 V).
General error
1. Faulty potentiometer/wiring
2. Defective electronic card A5
REFLEX RR B/E, RR B/E CC
T-code
403-414, 669-671, 716-718
Date
2005-06-01
24- 65