General Tightening Torque; Galvanised, Non-Oiled Bolts; Untreated, Oiled Bolts - BT REFLEX RR B Service Manual

Table 2: General tightening torque in Newton metres NM
Thread
Tightening torque
Tightening torque
Thread
Tightening torque
Tightening torque
Table 3: General tightening torque in Newton metres NM
Thread
Tightening torque
Tightening torque
Thread
Tightening torque f
Tightening torque
© BT Europe AB
Technical data – M4

General tightening torque

Valid from serial number
713962-
Order number
218920-040
3.1 General tightening torque
Millimetre threads.
The following applies under ideal conditions, e.g. steel against steel.

3.1.1 Galvanised, non-oiled bolts

A M3
8.8 1.15
12.9 2.0
A M12
8.8 77.7
12.9 130.5
A=Strength class

3.1.2 Untreated, oiled bolts

A M3
8.8 1.2
12.9 2.1
A M12
8.8 81
12.9 136
A=Strength class
NOTE!
Experience has shown that if you adjust the torque wrench to the val-
ues for untreated bolts, you will achieve the correct torque value for
galvanised bolts.
Do not tighten more than the values set out in the table otherwise the
bolts may be destroyed
Service Manual
https://www.forkliftpdfmanuals.com/
M4 M5
2.8 5.5
4.7 9.3
M14 M16
123 189
208 319.7
M4 M5
2.9 5.7
4.9 9.7
M14 M16
128 197
217 333
REFLEX RR B,E RR B,E CC
T-code
403-414, 669-671, 716-718
Date
2005-09-09
M6 M8 M10
9.5 23.0 45
16.3 38.5 75.8
M20 M24
369.6 638.5
623 1075
M6 M8 M10
9.8 24.0 47
17.0 40.0 79.0
M20 M24
385 665
649 1120
3- 5