BT REFLEX RR B Service Manual page 354

33- 2
Tilt cylinder – 6660.1
Mast with valve on the fork carriage
T-code
403-414, 669-671, 716-718
Date
2005-06-01
33.2 Mast with valve on the fork carriage
33.2.1 Dismantling the fork carriage
1
2
3
4
5
6
7
10
11
12
14
15
• Lift up the fork carriage to the right working height.
• Remove the forks.
• Remove the clamping ring to dismantle the side shift (2) or the stay
(1).
• Loosen the bolts (11) and remove the stop lug (12).
• Secure a lifting strap around the fork yoke (3) and lift out using an
overhead crane.
• Unscrew the bolts (4) and remove the plate (5) and the sliding block
(6).
• Loosen the nut/bolt (15) and unbolt the bolts (10) from the fork car-
riage (13).
• Remove the tilt cylinder.
• Knock out the spiral pin (8) and remove the plate (7).
Service Manual REFLEX RR B/E, RR B/E CC
https://www.forkliftpdfmanuals.com/
Valid from serial number
713962-
Order number
218920-040
9
8
13
© BT Europe AB