BT REFLEX RR B Service Manual page 259

© BT Europe AB
Electronic card – 5710
Warning codes with registration
Valid from serial number
713962-
Order number
218920-040
24.10 Warning codes with registration
When a warning code is registered, it is automatically displayed. Regis-
tration is made in the first of the 50 possible locations and moves previ-
ous errors one step down.
Warning codes 50–64 are either for valve, support arm brake or cable
breakage or short circuits.
Warning codes 90-94 are either for potentiometer or cable breakage.
Only the actual function is disabled; other functions are unaffected.
Code
Description
Error mode
Error cause
Comments
Hydraulic valve Y45 engages the cab lift
1. Disconnect the cable 67 from output 710.
- Check that the connector pins make contact, no play and no oxi-
disation.
- Check that the cable 67 is intact between terminal 701 and the
terminals in X47/X54.
- Measure the coil resistance of Y45 between the blue and black
cables. The resistance should be approx. 90 Ohms.
- Check whether cable 40 is intact from X54 to battery minus.
2. If the fault remains, replace A5.
Service Manual
https://www.forkliftpdfmanuals.com/
50
Output 710 short circuit/breakage
General error
1. Faulty wiring/valve Y45
2. Defective electronic card A5
REFLEX RR B/E, RR B/E CC
T-code
403-414, 669-671, 716-718
Date
2005-06-01
24- 47