BT REFLEX RR B Service Manual page 253

© BT Europe AB
Electronic card – 5710
Warning Codes without registration
Valid from serial number
713962-
Order number
218920-040
Code 29
Description Service time (S) is zero
Error mode No corrective action
Error cause 1. Time for servicing
Comments Reset with parameter 25
1. Resetting parameter 25:
- See the section "Programming" in this document.
- The service intervals can be checked in the section Preventive
maintenance.
Code
Description
Error mode
Error cause
Comments
Temperature sensor B1 in drive motor M1
1. Check that the ventilation is okay, especially the fan M10 in the
motor compartment.
Service Manual
https://www.forkliftpdfmanuals.com/
40
Warning temperature for drive motor
Maximum current reduced
1. Overheated drive motor M1
2. Faulty temperature sensor/wiring
3 Defective drive regulator, A1
REFLEX RR B/E, RR B/E CC
T-code
403-414, 669-671, 716-718
Date
2005-06-01
24- 41