BT REFLEX RR B Service Manual page 232

24- 20
Electronic card – 5710
Parameter setting of all parameters
T-code
403-414, 669-671, 716-718
Date
2005-06-01
24.5.21 Parameter 28
Using this parameter, it is possible to switch the information on output
208 during truck operation. Use an intermediary relay if the connected
component draws much current.
24.5.22 Parameter 29
If the truck is equipped with height measurement, use this parameter to
set the maximum lift height. Bypassing this lift height is not possible.
For more information, see parameters 17 and 18.
24.5.23 Parameter 30
Using this parameter, it is possible to switch the information on the I/O
box outputs during truck operation. Use an intermediary relay if the
connected component is draws much current.
24.5.24 Parameter 37
• Set this parameter to the weight with which the truck is calibrated.
Complete programming in the usual manner.
Service Manual REFLEX RR B/E, RR B/E CC
https://www.forkliftpdfmanuals.com/
Valid from serial number
713962-
Order number
218920-040
© BT Europe AB