BT REFLEX RR B Service Manual page 242

24- 30
Electronic card – 5710
Warning Codes without registration
T-code
403-414, 669-671, 716-718
Date
2005-06-01
2. If LD203 does not go out, check the cable by also removing it
from terminal 203.
3. If LD203 does not go out, replace the A5 electronic card.
Code 15
Description Safety switch activated more than 20 minutes with-
out moving the truck
Error mode No corrective action
Error cause 1. Strapped switch
2. Faulty switch/wiring
3. Defective electronic card A5
Comments
Safety switch (left-foot switch), S23
1. If LD110 is on the entire time.
- Check that the safety switch has not been strapped.
- Remove cable 43 on the switch S23, terminal 3. If LD110 goes
out, check the functionality of S23.
2. If LD110 does not go out, check the cable by also removing it
from terminal 110.
3. If LD110 does not go out, replace the A5 electronic card.
Service Manual REFLEX RR B/E, RR B/E CC
https://www.forkliftpdfmanuals.com/
Valid from serial number
713962-
Order number
218920-040
© BT Europe AB