BT REFLEX RR B Service Manual page 407

© BT Europe AB
Battery charger – 8340
Functional description
Valid from serial number
713962-
Order number
218920-040
38.3.9 Display and keyboard
The charger's panel contains, among others, a display, keyboard and
three LEDs.
• The LEDs show the current charging phase and any errors.
• The display shows different measurement values and the gathered
data. During charging the display shows the normal charging current
and during measurement and resting the battery voltage.
• You can control the displayed information and program the compu-
ter from the keyboard.
Reading of analogue measurement values
You can read off the analogue measurement values during the current
charge on the display. The significance of the codes is shown in the fol-
lowing table:
• Press * code *.
:
Code The display shows
10 The voltage on the charger's output (V)
11 Total charging time during the main and post charging
(hh.mm)
12 Recharged ampere-hours (Ah)
13 Charging time with voltage under 2.37 V/cell (hh.mm)
14 Charging time with voltage over 2.37 V/cell (hh.mm)
15 Charging current (A)
16 Mains voltage (VAC)
17 Air temperature around the mother board (°C)
18 Temperature on one of the wound units (transformer in
V2-V3, choke in others) (°C)
19 Temperature on one of the diode heatsinks (°C)
Service Manual
https://www.forkliftpdfmanuals.com/
REFLEX RR B/E, RR B/E CC
T-code
403-414, 669-671, 716-718
Date
2005-06-01
38- 5