BT REFLEX RR B Service Manual page 302

24- 90
Electronic card – 5710
Error Codes
T-code
403-414, 669-671, 716-718
Date
2005-06-01
Code 206 - 207
Description Overheated drive regulator
Error mode Drive regulator error
Error cause 1. Defective cooling fan
2. Defective motor, M1
3. Defective drive regulator, A1
Comments Restart possible
1. Check the fan M12, by the frequency converters.
2. Check the drive motor and its cables.
3. If everything else is okay, replace A1.
Code 208
Description Too high current on drive regulator
Error mode Drive regulator error
Error cause 1. Motor cables incorrectly connected
2. Defective driving regulator, A1
Comments
Drive motor circuit
1. Check that the motor cables are intact and connected correct-
ly.
2. Replace the drive regulator, A1.
Service Manual REFLEX RR B/E, RR B/E CC
https://www.forkliftpdfmanuals.com/
Valid from serial number
713962-
Order number
218920-040
© BT Europe AB