BT REFLEX RR B Service Manual page 373

© BT Europe AB
Main mast –7100
Adjusting the play
Valid from serial number
713962-
Order number
218920-040
• Carefully lift the mast out of the pin holders, at the same time as the
feeder hose (2) is eased out of the reach carriage.
• Carefully lower the mast to the floor.
• Place the mast on a pallet on the floor or, for a more comfortable
working height, on a pair of trestles.
CAUTION!
Unexpected/uncontrolled movement
When the mast is laid down, shifting of the centre of gravity may
cause the mast to slide to the ground.
Ensure no one is within the area in which the mast can move: mast
length + 2 metres safety distance. Always stand to the side of the
mast at a safe distance, as far away as the controls of the overhead
crane will allow.
• Dry or wipe off any oil spillage on the truck.
35.6 Adjusting the play
• Dismantle the mast from the truck
NOTE!
Oil leakage.
Risk of valve or cylinder failure if dirt enters the hydraulic connec-
tions.
Plug all hydraulic connections.
• Place the mast horizontally on a number of pallets or the like.
Service Manual
https://www.forkliftpdfmanuals.com/
REFLEX RR B,E RR B,E CC
T-code
403-414, 669-671, 716-718
Date
2005-06-01
35- 9