BT REFLEX RR B Service Manual page 227

© BT Europe AB
Electronic card – 5710
Parameter setting of all parameters
Valid from serial number
713962-
Order number
218920-040
24.5.1 Parameter 1
The higher the value entered, the less the steering wheel needs to be
turned to turn the drive wheel. The value 6 provides steering with no
progressive steering, i.e. reduced sensitivity at higher speeds.
24.5.2 Parameter 2
Use this parameter to set the maximum allowed travel speed.
24.5.3 Parameter 3
The lower the value entered, the longer it will take for the truck to reach
maximum speed.
24.5.4 Parameter 4
Use this parameter to set the force applied when the truck brakes, i.e.
when the accelerator pedal is released.
24.5.5 Parameter 5
Use this parameter to set the force applied when the truck brakes when
switching the travel direction and the drive motor is used to brake the
truck.
24.5.6 Parameters 6 and 7
Use these parameters to set the height to which the cab (RR E1–8)
should be tilted up and down to. Both values use the reference height in
the initial setting.
24.5.7 Parameter 11
Use this parameter to set the maximum allowed travel speed when
switch S31 is actuated.
24.5.8 Parameter 12
Use this parameter to adjust the extension and retraction speed of the
mast.
24.5.9 Parameters 13 and 14
Use these parameters to adjust the oil flow to the two optional hydraulic
functions.
Service Manual
https://www.forkliftpdfmanuals.com/
REFLEX RR B/E, RR B/E CC
T-code
403-414, 669-671, 716-718
Date
2005-06-01
24- 15