BT REFLEX RR B Service Manual page 361

© BT Europe AB
Tilt cylinder – 6660.2
General
Valid from serial number
713962-
Order number
218920-040
34- Tilt cylinder – 6660.2
34.1 General
The cab tilt cylinder is fitted in trucks with tilting driver cabs. It is located
behind the drive unit and mounted on the battery compartment wall and
on the underside of the top section.
34.2 Dismantling the cylinder from the
truck
To open and close the motor compartment, see section P1 in this man-
ual.
• Loosen the door lock and open the door.
• Unscrew the return hose from the tank and plug the return hose by
the tank.
• Support the top of the cab with pallets or an overhead crane, so that
it is not suspended in the cab tilt cylinder.
• Loosen the nuts the hold the top of the cylinder.
• Unscrew the cylinder bracket from the battery compartment wall.
• Pull out the cylinder so the you can access the hose coupling. Loos-
en the hose and plug the hose and coupling on the cylinder.
• Dismantle the bracket from the cylinder.
Service Manual
https://www.forkliftpdfmanuals.com/
REFLEX RR B/E, RR B/E CC
T-code
409-414, 669-671
Date
2005-06-01
34- 1