BT REFLEX RR B Service Manual page 249

© BT Europe AB
Electronic card – 5710
Warning Codes without registration
Valid from serial number
713962-
Order number
218920-040
4. Calibration of the joystick now takes place. If the correct volt-
age is on input 504 and calibration does not help, replace the
A5 electronic card.
Code 24
Description Potentiometer R14 or R15 for extra functions "1" and
"2" give incorrect voltage when the ignition key is
switched on (+/-06 V).
Error mode Start up error
Error cause 1. Activated joystick at start up
2. Faulty potentiometer/wiring
3. Calibration error
4. Defective electronic card A5
Comments Manoeuvre to neutral position
Extra hydraulic functions, joystick R14 and joystick R15
27
X32 X11
Pg 6 4
X11
28 X32
Pg 6 4
R14
R15
1. Check that both of the joysticks for the extra hydraulic func-
tions have not stuck in actuated positions.
2. Check that R14 and R15 are located in their brackets.
Check that there is no play or oxidisation on the connector
pins on terminal X11. The voltage on input 506 and 510 should
be 3.7 +/-0.6 VDC when R14 and R15 are correctly adjusted.
3. Calibration of the control for extra hydraulic functions
- Check that both the joysticks are not actuated and are in their
neutral positions.
- Restart the truck.
4. Calibration of the joysticks now takes place. If the correct volt-
age is on inputs 506 and 510 and calibration does not help, re-
place the A5 electronic card.
Service Manual
https://www.forkliftpdfmanuals.com/
Ye
X11
X33
R
Gr
X33
Ye
X11
R
Gr
REFLEX RR B/E, RR B/E CC
T-code
403-414, 669-671, 716-718
Date
2005-06-01
ELECTRONIC CARD
A5
82
503 INP. JOYSTICK FORK
83
504 INP. JOYSTICK REACH CARRIAGE
84
505
INP. JOYSTICK TILT
85
506 INP. JOYSTICK SPARE 1
86
510 INP. JOYSTICK SPARE 2
202
208
81
204 X INP. WEIGHT
98
301 X
INP. LIFT LIMIT SPECIAL HEIGHT
100
205 X
INP. OVERRIDE
24- 37